     Files                            Description
-------------   ------------------------------------------------------------
CFIDE.DRIVER    Apple /// CF/IDE driver file.  Use the Apple /// system utilities
                program to install & configure the CFIDE driver in the SOS.DRIVER
                file on the boot disk.  Each drive, .CFIDE1 thru .CFIDE8,                                        corresponds to a partition on the drive(s).  Set configuration
                byte 0 to either 0 (for master) or 1 (for slave) for each drive.
                Set the .CFIDE1 drive to the slot the CFFA card is installed.
                Recommend toggling the active/inactive status of any unused drives
                (.CFIDE1 thru .CFIDE8)to inactive.

CFIDE.INTERP    Apple /// CF/IDE Utilities Program.  This Utility program is
                intended to setup, test, and manage your CompactFlash or IDE
                drives attached to the CFFA interface card.  Rename this file
                to SOS.INTERP if installed on a boot disk or set your selector
                program to launch this file.  The CFIDE driver must be included
                in the SOS.DRIVER file on the boot disk in order for this program
                to work.

CFideIII.txt    Summary of driver and partitioning utility software features.

CFide.v1.1.txt  CFIDE driver source (ASCII).

CFutil.txt      CFIDE partition software source (ASCII).

CATALYST.TXT    DIB configuration bytes for Quark's .CATALYST driver
